 |
|
|
 |
Home | Bus Equipment | Light Rail Equipment | Phenolic Scrapers | Information Request Form | Partners
|
||||||
|
Home | Bus Equipment | Light Rail Equipment | Phenolic Scrapers | Information Request Form | Partners |
||||||
| Bus Maintenance Equipment |
| Diesel Engine Repair Stand (Mobile) - BCW Model No. DS-6000 |
| The BCW Diesel Engine Repair Stand was designed as
a heavy duty mobile repair stand for rebuilding large diesel engines. The stand is equipped with an air over hydraulics
system rated at 15 tons of force for rotating the engine 90 degrees in the vertical plane. Flanged ball bearings
provide the low friction surface for rotating the engine in the vertical plane. Once the engine is in the vertical
position, high precision taper bearings allow the engine to be easily rotated when the detent pin is deactivated. The stand base is 48 inches by 60 inches and the height of the stand is 38.5 inches with a main shaft centerline of 34.5 inches for the floor surface. The stand is ruggedly constructed using steel channel and one inch steel plate for the main bearing loads and a high strength box as the pedestal. An air hydraulic pump provides the energy conversion of air to hydraulic power. 100 psi shop air is all that is required to produce 10,000 psi of hydraulic pressure and 15 tons of force. The unit is designed for fail safe conditions. An air/spring detent pin securely locks the head in any of four positions. The unit is designed so that the spring returns the detent into the index hole and the air pressure retracts the detent pin. Again, a fail safe feature in case there is a loss of air pressure. |
Special Features: |
|
|
|
|||||||||
|
© 1999-2006 BCW Engineering & Manufacturing. All rights reserved. |
|||||||||
