Home | Bus Equipment | Light Rail Equipment | Phenolic Scrapers | Information Request Form | Partners

Bus Maintenance Equipment
Transmission Rebuilding Stand (Mobile/Pedestal) - BCW Model No.TS- 6000
The BCW TS-6000 Transmission Rebuilding Stand is equipped with an air-over hydraulics system rated at 15 tons for rotating the transmission 90 degrees in the vertical plane. Flanged ball bearings provide the low friction surface for rotating in the vertical plane and high precision taper bearings allow for easy and safe 360 degree rotation in the horizontal plane when the detent pin is deactivated.

An air hydraulic pump provides the energy conversion of air to hydraulic power. 100 psi shop air is all that is required to produce 10 thousand psi of hydraulic pressure and 15 tons of force. An air/spring detent piston pin securely locks the head in any of six positions the operator may select for tear down or rebuilding. The system is safe, fast, and eliminates fatigue associated with hand crank units. Rated at 6,000 lbs., with a safety factor of 1.5.

    Special Features:

  • Ruggedly constructed for safety, strength and durability.
  • Air over hydraulics.
  • Precision taper bearings.
  • All roller bearing pivot points.
  • 100 psi shop air to fully operate.
  • Simple, safe, and fast operation.
  • Eliminates fatigue and strain associated with older hand crank units.
  • Rated at 6000 lbs. with safety factor of 1.5.

To Contact us:
BCW Engineering & Manufacturing
230 Umbarger Road, Unit #5
San Jose, CA 95111

Phone:
Fax:		 408.867.7810
408.867.6935
Email: sales@bcwengineering.com

© 1999-2006 BCW Engineering & Manufacturing. All rights reserved.